How to read a certificate of analysis for an ecdysteroid supplement

A line-by-line guide to a certificate of analysis: who issued it, which batch, which method, specification versus result, marker compounds and contaminants.

A certificate of analysis (CoA) is a laboratory document for one batch of a material or product. According to the WHO model certificate, it lists the tests performed on a sample, the acceptance criteria and the results, and states whether the sample complies with the specification. In the United States, a supplement maker may rely on a supplier’s certificate only if it gives the test methods, the limits and the actual results, and only after confirming the supplier’s results itself (21 CFR 111.75).

This guide goes through such a document line by line, with examples from published analyses of ecdysteroid supplements. It is general and describes no certificates of Ekdiyan; the documents we actually hold are listed on the Documents page.

1. Who issued it

The WHO model begins with the name and address of the laboratory that issued the certificate. Three situations are common:

  • the manufacturer’s own laboratory tested the finished tablets or capsules;
  • the supplier of the extract tested the raw material, so the certificate describes the extract and not the finished product;
  • an independent contract laboratory tested a sample that was sent to it.

These certificates answer different questions. The WHO model asks that results obtained by subcontractors be marked as such, and that a certificate reissued by a trader still name the laboratory that did the testing and the original manufacturer.

Accreditation. Testing laboratories are accredited against the standard ISO/IEC 17025 by national accreditation bodies; the bodies that have signed the ILAC arrangement accept each other’s accredited results. Accreditation covers particular tests, which is why the WHO model asks a laboratory to refer to its accreditation on a certificate only where it relates to the analysis in question. To check a claim:

  1. find the accreditation body and the accreditation number on the certificate;
  2. look the body up in the ILAC signatory search;
  3. open that body’s directory of accredited laboratories and read the scope: is the assay you care about in it?

2. Which batch, and when

Look for the batch (lot) number, the date of manufacture, the expiry or retest date and the date on which the laboratory received the sample; all of them are in the WHO model. The batch number must match the one printed on the pack in your hand. A certificate says nothing about any other batch.

Published data show why this matters. In a Hungarian study of 21 samples, the ecdysterone content of different batches of one brand varied with a coefficient of variation above 80 %. In a training study published in 2025, the batch of a commercial product used in the trial contained less than 10 µg of 20-hydroxyecdysone per capsule against 25 mg on the label, while an earlier batch of the same product had been measured at 22.29 mg.

3. Which method

This line decides what the number means.

Method on the certificate What is measured What to keep in mind
UV spectrophotometry (“by UV”, “UV-Vis”) Light absorbed by the whole dissolved sample at one wavelength Ecdysteroids as a class absorb strongly near 242 nm, so the reading does not separate one ecdysteroid from another, or from anything else that absorbs there
HPLC with UV or diode-array detection (HPLC-UV, HPLC-DAD) The compounds are first separated on a column; each peak is then measured against a reference standard Gives separate figures for turkesterone and 20-hydroxyecdysone
LC-MS, LC-MS/MS Separation plus identification by molecular mass The most specific of the three; also used to look for undeclared substances

The absorbance of ecdysteroids is described in a review of their production and analysis. The general problem is set out in a review of botanical ingredient testing: spectrophotometric results are often higher than those of more specific methods, because other substances that absorb at the same wavelength are counted too, and such results are sometimes the only composition data on a supplier’s certificate. The authors add that reporting a UV figure is not fraudulent in itself, but that the method should always be declared.

Both kinds of figure circulate in the trade in ecdysteroid raw materials. The authors of a 2016 study bought one extract whose purity was stated “by HPLC” and another whose purity was stated by UV absorbance. We found no published side-by-side comparison of the two methods for Ajuga turkestanica extracts, so the size of the difference for this plant is not known.

The published analyses of marketed products all used chromatography: HPLC-UV at 242 nm in a 2023 paper, liquid chromatography with mass spectrometry in a 2026 paper and in a research letter in JAMA Network Open.

Two smaller things to look for: a reference to method validation (linearity, precision, accuracy, limits of detection and quantification), and the limit of detection wherever a result reads “not detected”.

4. Specification and result

A complete certificate has two columns: the specification, which is the acceptance limit set in advance, and the result, which is what was found in this batch. The WHO model asks for results in numerical form where applicable, compared with the limits, and for a conclusion; the US rule speaks of actual results. A column that says only “complies” gives the conclusion without the measurement.

Check the units. A result may be given as a percentage of the extract, in milligrams per gram or in milligrams per tablet, and only the last can be compared directly with a label. A paper from an anti-doping laboratory reported ecdysterone in six products as 5 to 383 mg per gram of product; such a figure cannot be set against a per-serving label without the fill weight of the capsule.

5. “Standardised to 10 % turkesterone”

The phrase is a specification for the extract: one tenth of its mass is meant to be turkesterone, so 500 mg of extract nominally carries 50 mg.

It does not say:

  • by which method the 10 % was determined (see section 3);
  • whether the figure was measured in this batch or copied from the supplier’s specification;
  • what the other 90 % of the extract consists of;
  • anything about what the compound does: a certificate is a statement about composition only.

What published analyses found in products carrying this wording:

  • three products with 500 mg of extract each: 51.77, 0.64 and 6.23 mg of turkesterone per capsule (the 2023 paper);
  • four products in the 2026 paper from the same laboratory: 54.77, 0.64, 6.23 and 40.03 mg;
  • eight products listing turkesterone in the JAMA Network Open letter: none detected in four, and 0.01 to 0.1 mg per serving in the other four.

The review of botanical ingredient testing describes the mechanism in general terms: an ingredient can appear to meet a specification for a marker compound when the test used to measure the marker is not specific enough.

6. Marker compounds: turkesterone and 20-hydroxyecdysone

A marker is a defined compound that a laboratory measures in order to characterise an extract. For Ajuga turkestanica two of them matter. A phytochemical study isolated fourteen ecdysteroids from a turkesterone-rich fraction of the plant and described turkesterone and 20-hydroxyecdysone as the two major ones. 20-hydroxyecdysone is the compound that labels usually call ecdysterone.

A certificate that reports only one of the two, or only “total ecdysteroids”, leaves the ratio unknown. In the 2023 paper, two of the three A. turkestanica products contained more 20-hydroxyecdysone than turkesterone: 47.26 mg against 0.64 mg, and 19.64 mg against 6.23 mg. In another study a product sold under the name of turkesterone contained 2.3 mg of 20-hydroxyecdysone per capsule; that study did not measure turkesterone itself.

A chromatographic fingerprint can also point to the plant source. The 2016 study showed that products labelled as spinach extract had the ecdysteroid profile of Cyanotis arachnoidea.

7. Contaminants

For a botanical product, a certificate usually has lines for heavy metals, pesticide residues and microbiology. The limits depend on the standard that the certificate cites, and that standard should be named. As one example, Regulation (EU) 2023/915 sets the following maximum levels for food supplements.

Contaminant Maximum level
Lead 3.0 mg/kg
Cadmium 1.0 mg/kg (3.0 mg/kg for supplements consisting of at least 80 % dried seaweed, seaweed products or dried bivalve molluscs)
Mercury 0.10 mg/kg
Benzo(a)pyrene, in supplements containing botanicals 10.0 µg/kg
Sum of four polycyclic aromatic hydrocarbons, in the same products 50.0 µg/kg
Pyrrolizidine alkaloids, in supplements containing botanical preparations 400 µg/kg

These figures are taken from the regulation as published in 2023; check the consolidated text for later amendments. Other countries set their own limits.

A standard certificate does not cover substances prohibited in sport. That is a separate analysis: in the Hungarian study, prohibited anabolic steroids were detected in four of the 21 samples. See our page on the anti-doping status.

8. Reasons to ask questions

  • No batch number, or a number that differs from the one on the pack.
  • No test method, or only “UV” against a single named compound.
  • No laboratory name and address, no date, no signature of the person who approved the certificate.
  • Results given only as “complies” or “conforms”.
  • A result that equals the specification exactly in every certificate, for example 10.0 % each time. Measured values in the published studies differ from batch to batch and are rarely round.
  • The same figures on certificates for different batches.
  • A certificate for the extract presented as a certificate for the finished tablets.
  • An accreditation logo without a number, or a scope that does not include the assay.

None of these proves that something is wrong. Each is a reason to ask the manufacturer.

What a certificate cannot tell you

A certificate describes the sample that was tested. It does not describe other batches, and it says nothing about effects on the body, about suitability for athletes or about whether a product may be sold in a particular country. What independent laboratories found when they tested marketed products is summarised in a separate article.

Questions

Is a certificate of analysis the same as a permit or registration?
No. A certificate of analysis reports laboratory results for one batch. A permit or registration is an administrative decision of an authority about a product.
Is an HPLC figure always right and a UV figure always wrong?
No. HPLC separates individual compounds, but the figure still depends on a validated method, a reference standard and a competent laboratory. A UV figure is a total; it can be reported honestly as long as the method is stated.
Why should a certificate show both turkesterone and 20-hydroxyecdysone?
Both are major ecdysteroids of Ajuga turkestanica, and published analyses found products in which the second exceeded the first. One figure does not show the ratio.
Can I check a laboratory’s accreditation myself?
Yes. Find the accreditation body named on the certificate in the ILAC signatory search, open that body’s directory and read the scope of the laboratory’s accreditation.

Sources

  1. World Health Organization. Model certificate of analysis. WHO Technical Report Series, No. 1010, Annex 4, 2018
  2. United States Code of Federal Regulations, 21 CFR 111.75: dietary supplements, what must be done to determine whether specifications are met
  3. International Laboratory Accreditation Cooperation. ILAC MRA and Signatories
  4. Gafner S. et al. Botanical Ingredient Forensics: Detection of Attempts to Deceive Commonly Used Analytical Methods. Journal of Natural Products, 2023; 86: 460–472
  5. Thiem B. et al. Ecdysteroids: production in plant in vitro cultures. Phytochemistry Reviews, 2017; 16: 603–622
  6. Hunyadi A. et al. Ecdysteroid-containing food supplements from Cyanotis arachnoidea on the European market. Scientific Reports, 2016; 6: 37322
  7. Guibout L. et al. The minor ecdysteroids from Ajuga turkestanica. Phytochemical Analysis, 2015; 26: 293–300 (abstract)
  8. Todorova V. et al. Development and Validation of High-Performance Liquid Chromatography for Identification and Quantification of Phytoecdysteroids Ecdysterone and Turkesterone in Dietary Supplements. Processes, 2023; 11: 1786
  9. Todorova V. et al. Simultaneous LC–MS Profiling of Bioactive Ecdysteroids in Nutrient-Dense Plant Sources and Dietary Supplements. Molecules, 2026; 31: 1090
  10. Cohen P. A. et al. Presence and Quantity of Botanical Ingredients With Purported Performance-Enhancing Properties in Sports Supplements. JAMA Network Open, 2023; 6(7): e2323879
  11. Pálinkás Z. et al. Quantitation of Ecdysterone and Targeted Analysis of WADA-Prohibited Anabolic Androgen Steroids, Hormones, and Metabolic Modulators in Ecdysterone-Containing Dietary Supplements. Separations, 2023; 10: 242
  12. Dissemond J. et al. How reliable is the labeling of a commercial phytosteroid product? Journal of the International Society of Sports Nutrition, 2025; 22(1): 2540408
  13. Kraiem S. et al. Analytical strategy for the detection of ecdysterone and its metabolites. Drug Testing and Analysis, 2021; 13: 1341–1353
  14. Grucza K. et al. Determination of Ecdysterone in Dietary Supplements and Spinach by UHPLC-MS/MS. Separations, 2022; 9: 8
  15. Commission Regulation (EU) 2023/915 of 25 April 2023 on maximum levels for certain contaminants in food

Food supplement. Not a medicinal product. Not intended to diagnose, treat, cure or prevent any disease. Ajuga turkestanica contains phytoecdysteroids, including ecdysterone and turkesterone. Research in humans is limited and its results are inconsistent. We make no claims about effects on health, performance or body composition.